Are you also facing a red light issue on the Rockspace WiFi range extender? If your reply is ‘Yes’ then you will need to consider this specialist advice. On this page, you will study the reason behind the red light issue. After that, we will share with you a few tips to fix this issue.

Reasons Behind Rockspace Extender Red Light Issue

• Due to the Rockspace WiFi extender’s older firmware.
• The ethernet wired connection is not stable and solid. 
• The power supply is improper. 
• Having serious technical issues. 
• Also, this problem occurs due to wireless disturbances. 

Troubleshoot Rockspace Extender Red Light Issue

Here are some tips to resolve your Rockspace WiFi extender’s red light error, which you can follow very simply:

Verify The Wire Connection

First, verify that the ethernet cable is perfectly connected to the Rockspace extender ethernet port. In case you are using it to make a cable connection with your gadget. Make sure that the cable must be connected to the suitable port correctly and securely. 

Check An Electrical Socket

Before starting the troubleshooting process, verify that your Rockspace WiFi range extender receives the correct power supply. 

If it is not getting then the easy step is to place the power plug of the Rockspace extender in another power socket to fix the red light issue. 

Move The Placement Of The WiFi Extender

Due to the improper placement of the extender, you can also face the red light issue. We recommend you change or move your Rockspace extender placement. Make sure that the placement of the Rockspace extender must be closer to the host router. As well as verify, don’t place your extender nearest to metal objects such as fridges, microwaves, cordless phones, etc because these all types of objects absorb the WiFi signal which basically comes from the router and extender. With the help of these, we hope the red light issue in the extender is solved. 

Unmatched Safety Protocols

Each extender and router has a connection issue if their protection procedure is incompatible and dissimilar. Moreover, check your Rockspace WiFi range extender is compatible with the security protocols of your host router. A security protocol that the Rockspace WiFi range extender supports is WPA, WPA2, and WPA3. 

Restart Your Rockspace Extender Device

Consider the below steps to do the power cycle method. 

• First, turn off your Rockspace WiFi extender by pushing the power button. 
• After that, wait at least 30 seconds, 
• In the end, turn on your extender device. 

Note: With the help of these five tips, we hope your Rockspace WiFi range extender red light issue is now solved. If not then try out these extra tips. 

Upgrade Extender’s Firmware

• First, go to the login page of Rockspace WiFi extender Firmware. 
• Now, fill in the username and security password in the required blanks. 
• After doing this, enter the settings of the Rockspace WiFi range extender. 
• Further, click on the administration option, and under that, tap on firmware update or similar to that. 
• In the end, download the latest version of the firmware file on your computer.

Reset Rockspace WiFi Range Extender

Follow the lower steps to try this method. 

• First, find and press the reset hole button on your Rockspace WiFi range extender. 
• Now, hold up the reset button for a few seconds. 
• As a result, your Rockspace WiFi range extender device is completely reset. 

Note: After the reset, you will need to do the Rockspace WiFi extender setup again. But before the setup first, you will need to login into the Rockspace extender. 

How To Login Into Rockspace WiFi Range Extender

• First, connect your Rockspace extender to the computer by an ethernet cable. 
• After that, open navigation and enter re.rockspace.local in the URL bar. 
• Further, fill in the extender ID and security password. 
• In the end, do the configuration process of the Rockspace extender.

Configure Rockspace WiFi Range Extender

With the help of these two approaches, you can easily do the Rockspace WiFi extender setup process. 

By WPS Method

• First, press the WPS button of the Rockspace WiFi range extender. 
• After that, press the WPS button of your host router in just 2 minutes. 
• Now, you see a solid blue LED on both the extender and router.
• As a result, it means both gadgets are successfully connected to each other. 

Attach Both By An Ethernet Cable

• First, join one end of the cable to the extender ethernet port. 
• Connect the remaining end of the ethernet cable to the router ethernet port. 
• Now, place the power plug of both extender and router in an electrical socket. 
• Further, to become a solid blue LED wait for a few minutes. 
• In the end, your Rockspace extender successfully links to the router. 

Note: After trying out these additional tips, if your extender red light issue is not solved then try out these methods. 

Upgrade The Firmware Of the Rockspace Router

Through this method, you can easily update the firmware of the Rockspace router. 

Update Router Firmware By WiFi Application

• First, attach your WiFi device to the router’s WiFi network. 
• Secondly, download the RS WiFi app on your mobile phone and enter into them. 
• Further, tap on the image of the router. 
• Next, go to the menu bar and update the router firmware. 
• In the end, wait for a few minutes to download the firmware completely. 

Reset Rockspace WiFi Router

• First, you will need to turn off your router. 
• Now, press the router reset button for 8 to 10 seconds. 
• Release the reset button, after completing a few seconds. 
• Finally, your Rockspace router will reset automatically.

In short, later reading this page we expect your Rockspace WiFi extender setup & red light issue is now solved. If you face any issues then discuss them with our team members. Stay and wait for further updates.